Specific Remove harness from around body?

[Wanderluster]

Hi everyone,

It would be great if one of you talented folk could remove the harnesses and shadows from this pic. I'm guessing the complicated T-shirt design may make it tricky to get it looking right but any efforts would be much appreciated.

Cheers
Graham




Mod edit: One edit per request thread please. Thanks.

 

[Babine]

 

[Rich54]

I may be wrong, but if you look at the area I highlighted in red, I'm not sure if that is supposed to be the top surface of the railing that he is leaning his arm on, or if it's the surface of the cement area that he's sitting on. It's very hard to tell which is correct and I keep changing my mind. But it seems to me that the rough cement surface would (should) extend out to the edge (by his knees) and that any metallic-looking surface is part of the railing. Probably the OP would know for sure.

 

[IamSam]

I may be wrong, but if you look at the area I highlighted in red, I'm not sure if that is supposed to be the top surface of the railing that he is leaning his arm on, or if it's the surface of the cement area that he's sitting on.

I also looked at that earlier. I decided the surface was more than likely not the railing as you can see here.
The harness strap and shadow is curving with the edge of the railing.


Also, this shadow is just on the smaller portion or the rail and not continuing on the metal flashing of the concrete edge.


I could also be wrong! LOL!!

 

[Wanderluster]

Thanks Babine that’s a great job. To clear up the confusion with the window cleaner dolly rail the concrete did used to extend to the edge. In recent years they have added a protective metal lip all around, if you google ’Tallinn TV tower roof’ you should be able to see what I mean.

Now that it has been bought to my attention it does bug me how the two metal surfaces have been taken at just the right angle for them to become lost and merged together. If anyone could edit the concrete to the edge that would be good and to my eye make the photo look better?

 

[Rich54]

Now that it has been bought to my attention it does bug me how the two metal surfaces have been taken at just the right angle for them to become lost and merged together. If anyone could edit the concrete to the edge that would be good and to my eye make the photo look better?

I took Babine's edit and extended the concrete out to the edge. This looks better to me.

Rich

 

[Wanderluster]

Spot on! That does look miles better. Thanks Rich.

If anyone is willing to have a crack at one taken from a more challenging angle I'll post it in another thread now.